Wall mounted hand shower holder to hold conical hose end. It has 2 angle settings.

 

Wall mounted hand shower holder to hold conical hose end. It has 6 ratchet angle settings

 

Sliding bracket able to fit onto a 32 mm safety grab rail. Hand shower hand piece fits into it and you can easily change hand shower direction

 

  • 5 Spray settings
  • 1.5 m hose
  • 25 mm diameter tube/rail
  • 150KG capacity
  • 900 mm length - can be shortened to suit
 

Chrome handpiece with quality 2.0 m stainless-steel hose, chrome water point elbow and flange and chrome sliding bracket to hold hand shower and 750 mm long highly polished or satin 32 mm stainless steel grab rail.

 

Designed to allow a hand shower hose to be attached to a bath spout.

 

For the shower cubicle to enable the existing shower rose and a hand held shower to be used on the one water point. The switch directs water flow from one device to the other device. 

 

Designed to allow the toilet to be flushed when the person moves away from the sensor.

 

Designed to replace a mixer tap or 2 tap and spout combination and transform into auto tap delivering only either hot or cold or tepid water. Can be used in most instances.

 

Designed to be retrofitted to an existing spout to change the tap to sensor activated. Great for bathroom and kitchen applications.

 

Especially good if the client requires a generous overhead rose and a generous sized hand held shower also with easy switch- cock function for switching water from rain head to hand shower.

 

Chrome handpiece with quality 2.0 m stainless steel hose, chrome water point elbow and flange and chrome 2 position chrome bracket

 

Chrome handpiece with quality 1.5 m stainless steel hose, chrome water point elbow and flange and chrome 2 position chrome bracket